The Perseverance rover recently collected its first two samples of Martian regolith! Regolith is dust and broken rock, and collecting it requires a different approach than collecting rock cores.
To start with, regolith sampling uses a different bit than rock sampling. The back of the regolith bit is very similar to a coring bit – it uses the same type of sample tube and interfaces with the drill the same way. However, the rest of its features are uniquely designed for sampling loose material. It is closed in the front and instead has two small inlets on the side. To sample regolith, these inlets are submerged below the surface so regolith can flow into the hollow tip. The inlets are sized so that every particle or pebble the bit retains will fit inside the sample tube.
The robotic arm and drill also operate in a different way for regolith sampling. When sampling a large pile of regolith like a dune, there is no firm surface to push the stabilizers against. Instead, the turret hovers over the surface, and the drill feed extends the bit out a pre-determined distance to contact the regolith. From there, it moves through the following steps:
Insertion: The drill percusses and rotates the bit while moving it 65mm into the regolith. The motion helps the regolith act more like a fluid, increasing the flow into the bit. The tooth on the front of the bit breaks up any crust that may have formed on the surface of the regolith, and the flutes help channel material into the inlets.
Collection: While the drill continues to hammer and spin the bit, the turret rotates 5 degrees in each direction to sweep through the regolith. If insertion caused the regolith to form walls around the bit rather than flow into it, this step disrupts the walls and ensures sample enters the bit.
Retraction: The drill makes sure the inlets are pointing up relative to gravity so that no sample is dropped, then slowly retracts from the regolith.
Leveling: The robotic arm moves the bit away from the regolith, points it down relative to gravity, then percusses for five seconds. This causes any accumulated regolith to fall off the outside of the bit, and also makes sure the tip of the bit is only full up to the inlets. This keeps the sample tube from being overfilled.
Ingestion: Now the sample needs to get from the tip of the bit to the sample tube. The turret rotates the bit upside down with occasional bursts of percussion to make the regolith flow into the tube. The motions are carefully controlled to keep the inlets pointing up so no sample can fall out.
After that, the rover can begin the process of returning the bit to the bit carousel, where the tube will be extracted, imaged, and sealed.
All these steps went very smoothly for both regolith collections! Each sample was about 53mm of height in the sample tube, or roughly 7 cubic centimeters of material.
Related Links
Perseverance Mars 2020
Mars News and Information at MarsDaily.com
Lunar Dreams and more
|
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook – our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don’t have a paywall – with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution. |
||
|
SpaceDaily Contributor $5 Billed Once credit card or paypal |
 |
SpaceDaily Monthly Supporter $5 Billed Monthly paypal only |
Japanese billionaire Maezawa announces crew of artists for lunar voyage
Washington (AFP) Dec 9, 2022
Japanese billionaire Yusaku Maezawa announced Thursday eight crew members who will join him for a journey around the Moon planned for 2023 on a SpaceX rocket that is still under development.
The mission, known as dearMoon, was first announced in 2018. Maezawa initially said he would invite a crew of six-to-eight artists, but later changed the entry requirements to a competition which applicants could apply for online.
The eight people chosen were DJ and producer Steve Aoki of the United States; … read more