The Sol 3483 drive completed as planned, positioning the rover near several outcrops of knobby material and more “normal” looking bedrock. The tactical uplink team discussed various options and decided to focus this plan’s observations on the knobby material. Unfortunately, timing constraints precluded an APXS integration today, as the instrument temperature would be too high to provide high-quality data.
On the brighter side, removing the APXS activities from the plan freed up time for other activities, including a small MAHLI mosaic of a knobby outcrop. The knobby material is too rough to brush clean using the DRT, so we decided to shoot ChemCam’s laser at a knob named “Cabo Sobral,” expecting that the expanding plasma cloud generated by the laser will blow dust off the surface of the knob. Laser-induced dust clearing has occurred throughout the mission, and is therefore a viable alternative to DRT brushing.
The Sol 3485 plan starts with a Mastcam measurement of the dust content of the atmosphere above MSL and a large Mastcam mosaic extending coverage of the “Deepdale” hills toward the southeast, followed by the ChemCam 5-point raster on Cabo Sobral and Mastcam stereo observations of nearby trough features and a multispectral Mastcam observation of the (hopefully) cleaned surface of Cabo Sobral.
Then Navcam will search for clouds and dust devils before MAHLI acquires a 3-frame mosaic from about 25 cm and a stereo image pair from about 7 cm of Cabo Sobral. The arm will then be stowed before a ~50-m drive toward the southeast. A SAM preconditioning activity is planned later that evening, followed by a DAN passive measurement.
The second sol of the plan starts with another DAN passive measurement and a ChemCam AEGIS activity, which will automatically select a bedrock target for a LIBS observation in the new rover location. Finally, MARDI will take an image of the ground behind the left front wheel during twilight.
Decisions, Decisions: Sols 3483-3484
by Ashley Stroupe | Mission Operations Engineer – JPL
Pasadena CA (JPL) May 25 – On this Monday 2-sol plan, I was one of three Rover Planners. I took the role of Arm Rover Planner, sequencing the contact science. I also helped to review the drive.
Before any of the Rover Planner activities, however, we planned an extensive suite of targeted science. Using the ChemCam laser, we are looking at the target “Takutu,” which is a bedrock target in our workspace. With the ChemCam RMI camera, we also do a long distance observation of a target named “Bolivar,” which is a distant vertical cliff face in the direction we are driving.
Mastcam is also observing the Takutu and Bolivar targets as well as a target named “Cachimbo,” which is target that may represent the contact between the Mirador formation and the upper sulfate unit. We finish up this pre-drive science with a couple of atmospheric observations, including a Navcam image of the horizon to look at dust in the atmosphere and a Mastcam of the deck to look at dust accumulation on the rover.
We expected to be planning standard pre-drive contact science, with APXS and MALHI. However, due to a later plan start time than usual, APXS would have been too warm to collect good data. So instead, we decided to do a DRT brush and take some MAHLIs. The rock is showing some nice layering, but is very dusty; without DRT the data would have been much lower quality. Selecting the contact science target was challenging today because the block we wanted to look at was near some other tall rocks.
We had to carefully select a spot that, even with uncertainty, we could be sure that we would not hit the wrist or the other turret instruments on those rock when we got close to the ground. With a few minor adjustments, we were able to find a target that worked well for science and was safe. The target was named “Imataca,” and it is a piece of representative bedrock from the workspace with some fine-grained layering.
Planning the drive was particularly interesting today because we had two possible paths along our strategically planned route; one was a little bit more east and one a little bit more west. After evaluating what we could see in the Navcams and Mastcams, a well as the orbital imagery, we ultimately picked the slightly more eastward path because we felt that it was more likely to be friendly terrain down the road. Friendly terrain in this case is still a little bit steep and has a lot of very large and sharp rocks along the way that we have to be careful to avoid (as shown in the attached image of our drive direction).
We have a lot of terrain occluding our view in today’s drive so we are using Autonav (“autonomous navigation”) which allows the rover to take images and assess safety to select its route to the goal. We’re driving to get as far as possible in the time we have (about 1:30) and try to park at a high point that will give us good visibility of the future path. We’re climbing about 2m in our 28m drive. At the end we are taking our standard set of post-drive imaging to see our path ahead and to image our new workspace for contact science.
On the second sol of the plan we are using AEGIS to autonomously take pictures, select an interesting target, and make some science observations on that target. It is always interesting to see what AEGIS picks to look at when we get the results. We also continue our atmospheric observations (after all, we are in the dusty season) with Mastcam and Navcam. Mastcam is looking at the crater rim and an image of the sun to look at how much dust is in the atmosphere.
Navcam is taking a dust devil survey and a suprahorizon movie a well. We also take our normal post-drive MARDI image just after sunset; we are doing this on the second sol rather than immediately after the drive because a communication with the Odyssey orbiter was happening at the desired time.
Related Links
Curiosity Mars Science Laboratory
Mars News and Information at MarsDaily.com
Lunar Dreams and more
|
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook – our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don’t have a paywall – with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution. |
||
|
SpaceDaily Contributor $5 Billed Once credit card or paypal |
 |
SpaceDaily Monthly Supporter $5 Billed Monthly paypal only |
Mastcam-Ing All the Things: Sols 3480-3482
Pasadena CA (JPL) May 24, 2022
Coming into planning on Friday, we were greeted with a beautiful vista, with well preserved layering and amazing outcrops, and a reminder of just how stunning the planet Mars is. Mastcam takes a 360 degree image on a regular basis, and our last one was fairly recently, on sol 3474, but given the stunning views from here, it was suggested that we take another here if we could fit it in.
As APXS planner today, I had hoped we would find something to DRT and remove some dust in this workspace, but I w … read more